Agilent HDSP-311x/313x 10.16 mm (0.4 inch) Single Digit General Purpose Seven Segment Display Data Sheet Applications * Suitable for indoor use Description This 10.16 mm (0.4 inch) LED single digit seven segment display uses industry standard size package and pinout. The device is available in either common anode or common cathode. The choice of colors includes High Efficiency Red (HER), Green, AlGaAs Red, and Yellow. The gray face displays are suitable for indoor use. * Not recommended for industrial application, i.e., operating temperature requirements exceeding +85C or below -25C[1] Features * Industry standard size * Industry standard pinout 10.16 mm (0.4 inch) character height DIP lead on 2.54 mm * Choice of colors High Efficiency Red (HER), Green, AlGaAs Red, and Yellow * Extreme temperature cycling not recommended Note: 1. For additional details, please contact your local Agilent sales office or an authorized distributor. * Excellent appearance Evenly lighted segments gray package gives optimum contrast 50 ft. viewing angle * Design flexibility Common anode right hand decimal point or common cathode right hand decimal point * Categorized for luminous intensity Green and yellow categorized for color Devices HER HDSP-311E Green HDSP-311G AlGaAs Red HDSP-311A Yellow HDSP-311Y HDSP-313E HDSP-313G HDSP-313A HDSP-313Y Description Common Anode Right Hand Decimal Common Cathode Right Hand Decimal Package Drawing A B Part Numbering System 5082 -X X X X-X X X X X HDSP-X X X X-X X X X X Mechanical Options [1] 00: No Mechanical Option Color Bin Options[1,2] 0: No Color Bin Limitation Maximum Intensity Bin[1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color [1] A: AlGaAs Red E: High Efficiency Red G: Green Y: Yellow Device Specific Configuration[1] Refer to Respective Datasheet Package[1] Refer to Respective Datasheet Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information. 2 Package Dimensions Package Drawing A TOP END VIEW FRONT VIEW COUNTRY OF ORIGIN 8 PIN 1 5.51 (0.220) COLOR BINNING (NOTE 3) 0.50 (0.020) 18.75 (0.738) HDSP-XXXX YWW XZ COO + 10.16 (0.400) 1.20 (0.047) 1.4 (0.55) 2.54 x 6 (0.100) LUMINOUS INTENSITY CATEGORY 4.10 (0.161) DATE CODE 5.54 (0.218) SIDE VIEW 9.80 (0.386) A 0.60 (0.020) F G E 5.10 (0.201) B C D DP 0.30 (0.012) 7.62 (0.300) NOTE: NO PINS 4, 5, 6, AND 12 DIMENSIONS IN MILLIMETERS (INCHES) 3 Package Dimensions Package Drawing B FRONT VIEW RIGHT SIDE COUNTRY OF ORIGIN 6.00 (0.236) LUMINOUS INTENSITY CATEGORY 10.00 COLOR BIN 2.54 0.38 (0.100) 10.00 (0.394) 1.85 (0.073) 1.20 (0.047) HDSP-XXXX YWW XZ COO 0.90 (0.035) 12.80 0.25 (0.504) 4 x 2.54 (0.400) 0.50 0.05 (0.02) 6.40 0.25 (0.252) 7.00 0.25 (0.276) TOP SIDE DATE CODE 10.40 MIN. (0.409) 9.70 0.25 (0.382) A 3.90 (0.153) F G E B C D DP 0.30 0.05 (0.012) 7.62 0.38 (0.300) 4 DIMENSIONS IN MILLIMETERS (INCHES) Internal Circuit Diagram COMMON ANODE RIGHT HAND DECIMAL HDSP-311E/311G/311Y/311A 3.14 COM A 1 B 13 C 10 D 8 E 7 F 2 G 11 DP 9 PIN No. CONNECTION 1 CATHODE A 2 CATHODE F 3 COMMON ANODE 7 CATHODE E 8 CATHODE D 9 CATHODE DP 10 CATHODE C 11 CATHODE G 13 CATHODE B 14 COMMON ANODE PINS 4, 5, 6, 12: NO PIN COMMON CATHODE RIGHT HAND DECIMAL HDSP-313E/313G/313Y/313A 3.8 COM A 10 5 B 9 C 7 D 5 E 4 F 2 G 1 DP 6 PIN NO. CONNECTION 1 ANODE G 2 ANODE F 3 COMMON CATHODE 4 ANODE E 5 ANODE D 6 ANODE DP 7 ANODE C 8 COMMON CATHODE 9 ANODE B 10 ANODE A Absolute Maximum Ratings at TA = 25C Description Power Dissipation Segment Forward Current Segment Peak Forward Current per Segment (1/10 Duty Factor at 10 KHz) Operating Temperature Range Storage Temperature Range Reverse Voltage per Segment or DP Wavesoldering Temperature for 3 seconds (at 2 mm Distance from the body) HER HDSP-31xE 65 25[1] 100 Green HDSP-31xG 65 25[2] 100 AlGaAs Red HDSP-31xA 30 15[3] 80 Yellow HDSP-31xY 52 20[4] 80 Units mW mA mA -35 to +85 -35 to +85 5 250 -35 to +85 -35 to +85 5 250 -35 to +85 -35 to +85 5 250 -35 to +85 -35 to +85 5 250 C C V C Notes: 1. Derate above 25C at 0.33 mA/C. 2. Derate above 25C at 0.33 mA/C. 3. Derate above 25C at 0.2 mA/C. 4. Derate above 25C at 0.27 mA/C. Electrical/Optical Characteristics at TA = 25C High Efficiency Red (HER) Devices HDSP- Parameter Luminous Intensity/Segment Symbol IV Forward Voltage Peak Wavelength Dominant Wavelength Reverse Voltage VF PEAK d VR Parameter Luminous Intensity/Segment Forward Voltage Symbol IV VF Min. 1.25 311E 313E Typ. 1.49 3.20 2.05 635 620 Max. 2.40 5 Units mcd mcd V nm nm V Test Conditions IF = 5 mA IF = 10 mA IF = 20 mA IR = 100 A Green Devices HDSP- 311G 313G 6 Min. 1.25 1.80 Peak Wavelength Dominant Wavelength Reverse Voltage PEAK d VR 5 Typ. 3.20 2.06 2.25 568 573 Max. 2.60 Units mcd V V nm nm V Test Conditions IF = 10 mA IF = 10 mA IF = 20 mA IR = 100 A AlGaAs Red Devices HDSP- Parameter Luminous Intensity/Segment Symbol IV Forward Voltage VF Peak Wavelength Dominant Wavelength Reverse Voltage PEAK d VR Parameter Luminous Intensity/Segment Symbol IV Min. 3.20 311A 313A Typ. 4.54 7.50 1.85 Max. 2.00 660 643 5 Units mcd mcd V Test Conditions IF = 5 mA IF = 10 mA IF = 20 mA nm nm V IR = 100 A Yellow Devices HDSP- Min. 0.80 311Y 313Y Forward Voltage Peak Wavelength Dominant Wavelength Reverse Voltage VF PEAK d VR Typ. 0.86 1.50 2.15 595 590 Max. 2.60 5 Intensity Bin Limits (mcd at 10 mA) Bin Name G H I J K L HER/Green Min.[1] NA 1.251 2.001 3.201 NA NA Yellow Min.[1] 0.801 1.251 2.001 NA NA NA Max.[1] NA 2.000 3.200 5.050 NA NA Max.[1] 1.250 2.000 3.200 NA NA NA AlGaAs Red Min.[1] Max.[1] NA NA NA NA NA NA 3.201 5.050 5.051 8.000 8.001 12.650 Note: 1. Tolerance for each bin limit is 10%. Color Bin Limits (nm at 10 mA) Color Green Yellow Bin 3 4 5 1 2 3 Dominant Wavelength (nm) Min.[1] Max.[1] 569.1 571.0 571.1 573.0 573.1 575.0 585.5 588.5 588.5 591.5 591.5 594.5 Note: 1. Tolerance for each bin limit is 1 nm. 7 Units mcd mcd V nm nm V Test Conditions IF = 5 mA IF = 10 mA IF = 20 mA IR = 100 A IF - FORWARD CURRENT PER SEGMENT - mA MAXIMUM DC CURRENT PER SEGMENT - mA High Efficiency Red (HER) 30 HIGH EFFICIENCY RED (HER) 25 20 15 10 5 0 0 20 40 60 80 100 120 100 80 60 40 20 0 0 0.5 Figure 1. Maximum allowable average or DC current vs. ambient temperature. 2.5 3.0 3.5 1.4 RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA) 2.0 Figure 2. Forward current vs. forward voltage. 2.5 2.0 1.5 1.0 0.5 0 5 10 15 20 25 30 Figure 3. Relative luminous intensity vs. DC forward current. 1.2 1.0 0.8 0.6 0.4 0.2 0 35 IF - FORWARD CURRENT FOR SEGMENT - mA 8 1.5 VF - FORWARD VOLTAGE - V TA - AMBIENT TEMPERATURE - C 0 1.0 0 5 10 15 20 25 30 35 40 45 50 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak current. IF - FORWARD CURRENT PER SEGMENT - mA MAXIMUM DC CURRENT PER SEGMENT - mA Green 30 GAP GREEN 25 20 15 10 5 0 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE - C 120 100 80 60 40 20 1.0 1.5 2.0 2.5 3.0 3.5 1.2 RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZEDTO 1 AT 10 mA) 0.5 Figure 6. Forward current vs. forward voltage. 3.0 2.5 2.0 1.5 1.0 0.5 0 5 10 15 20 25 30 35 IF - FORWARD CURRENT FOR SEGMENT - mA Figure 7. Relative luminous intensity vs. DC forward current. 9 0 VF - FORWARD VOLTAGE - V Figure 5. Maximum allowable average or DC current vs. ambient temperature. 0 0 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA Figure 8. Relative efficiency (luminous intensity per unit current) vs. peak current. 16 AIGaAs RED 14 12 10 8 6 4 2 0 0 20 40 60 80 100 IF - FORWARD CURRENT PER SEGMENT - mA MAXIMUM DC CURRENT PER SEGMENT - mA AlGaAs Red 120 100 80 60 40 20 0 0 0.5 Figure 9. Maximum allowable average or DC current vs. ambient temperature. 2.5 1.2 RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA) 2.0 Figure 10. Forward current vs. forward voltage. 3.0 2.5 2.0 1.5 1.0 0.5 0 5 10 15 20 25 30 35 IF - FORWARD CURRENT FOR SEGMENT - mA Figure 11. Relative luminous intensity vs. DC forward current. 10 1.5 VF - FORWARD VOLTAGE - V TA - AMBIENT TEMPERATURE - C 0 1.0 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA Figure 12. Relative efficiency (luminous intensity per unit current) vs. peak current. IF - FORWARD CURRENT PER SEGMENT - mA MAXIMUM DC CURRENT PER SEGMENT - mA Yellow 25 YELLOW 20 15 10 5 0 0 20 40 60 80 100 120 100 80 60 40 20 0 0 0.5 Figure 13. Maximum allowable average or DC current vs. ambient temperature. 2.0 2.5 3.0 3.5 Figure 14. Forward current vs. forward voltage. 1.4 RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) 3.5 RELATIVE LUMINOUS INTENSITY (NORMALIZEDTO 1 AT 10 mA) 1.5 VF - FORWARD VOLTAGE - V TA - AMBIENT TEMPERATURE - C 3.0 2.5 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 35 IF - FORWARD CURRENT FOR SEGMENT - mA Figure 15. Relative luminous intensity vs. DC forward current. 11 1.0 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA Figure 16. Relative efficiency (luminous intensity per unit current) vs. peak current. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152(Domestic/ International), or 0120-61-1280(Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. June 30, 2004 5988-2969EN